Steady Flame Fireplaces
US flagUkraine flagRussia flagMoldova flagGlobe
Many Backgrounds. One Standard.
Fairview, North Carolina

Do I need a high-altitude conversion kit for my gas fireplace, and above what elevation?

Fairview is propane country — out on the big wooded lots toward Cane Creek and Garren Creek, homes run on propane, so the fireplace orifice is propane-sized from the start. At 2,375 feet, some models sit at or over their listed altitude ceiling and want a manufacturer's adjustment, others don't. We check your specific unit and fuel together before install.

Propane and elevation, sized as one job

Propane burns through a smaller orifice than natural gas because it packs more energy per cubic foot, and above a fireplace's listed altitude the orifice changes again — so on Fairview's propane properties we set fuel and elevation in a single pass rather than pulling the burner twice. At 2,375 feet the town sits high enough that a fair number of models call for the manufacturer's high-altitude orifice or a per-thousand-feet input derate. The figure that decides it lives in your unit's installation manual, which we read against your actual site, not a rule of thumb about the town.

Wood heat, conversions, and the licensed line

Fairview's wooded lots make wood heat natural, and creosote buildup from skipped fall sweeps is the leading cause of chimney fires here — so whether you're keeping a wood fireplace, adding a stove, or converting to gas, annual service and a correct install both matter. Every gas conversion needs the propane line a mason or landscaper legally can't connect in North Carolina; we run and pressure-test it, pull the Buncombe County permit, and set the orifice for 2,375 feet, fifteen minutes east of our Asheville showroom. Call (828) 545-0525 for a free assessment.

Fireplace help in Fairview

We install and service fireplaces throughout Fairview and the rest of Buncombe County — just 15 minutes east from our Asheville-area showroom.

Text UsCall NowFree Quote