Can you install gas logs in my Old Fort fireplace?

Yes — if you have an existing masonry or factory fireplace in Old Fort, a vented or vent-free gas log set is one of the fastest hearth upgrades there is. In Old Fort we tie the set to your propane tank and size the line for the burner's BTU load. A showroom can sell you the logs, but only a licensed gas-piping contractor can legally run the fuel line — that's us. Free estimates for McDowell County homeowners.

We're on propane in Old Fort — does that change a fireplace install?

It does. Old Fort is propane country rather than natural gas, so a gas fireplace or insert here ties into your owner-owned or leased tank. That means the line has to be sized for the burner's BTU load, the regulator has to be set correctly, and the whole system pressure-tested — work only a licensed gas-piping contractor can legally do. Steady Flame handles all of it and permits the job through McDowell County. If a tank isn't practical, a wood stove or electric fireplace may be the better call, and we'll tell you so.

What areas in Old Fort does Steady Flame serve?

We install and service fireplaces, stoves, inserts, and gas lines throughout Old Fort and McDowell County, including Catawba Avenue, Curtis Creek, Mill Creek Road, Bernard Mountain, Andrews Geyser, Dogwood. Our Asheville headquarters is 30 minutes east from Old Fort, giving us fast scheduling for installs, repairs, and permitted gas-line work. Since Helene, more Old Fort homeowners treat a fireplace as heat that works when the power doesn't.

McDowell County · 30 minutes east

Gas Log Installation in Old Fort, NC

Vented and ventless gas log sets that bring instant fire to your existing fireplace — natural gas or propane. Proudly serving Old Fort & McDowell County.

Free Quote (828) 545-0525

NFI-certified20+ years24/7 service

(828) 545-0525

Professional Gas Log Installation in Old Fort, NC

When you need gas log installation in Old Fort, NC, Steady Flame Fireplaces is just 30 minutes east from our Asheville headquarters — meaning fast scheduling and reliable, code-compliant work. Steady Flame Fireplaces has been the licensed hearth team that Old Fort area homeowners trust since 2005.

Old Fort sits at the foot of the mountains in McDowell County, a historic railroad town where the tracks begin their steep climb toward the Eastern Continental Divide and the Catawba River gathers from Curtis and Mill Creeks. At about 1,440 feet it's a gateway between the Piedmont and the high country, drawing a growing outdoor-recreation crowd to its trails and campgrounds. Helene's flooding tore through the Catawba and its tributaries here, and as the town rebuilds, dependable propane and wood heat is a priority for homes rattled by the outage. Natural gas is limited in the area, so hearths run on propane and cordwood.

Old Fort is propane country — gas hearths here run off an owner-owned or leased tank, which changes line sizing, regulator setup, and BTU planning compared to a natural-gas town. Running the gas line is the part a fireplace showroom or a mason legally can't touch in North Carolina — it takes a licensed gas-piping contractor. Steady Flame holds that license, so we deliver the whole job in Old Fort: unit, venting, and the fuel line, all under one roof. McDowell County homeowners have leaned on gas hearths as reliable backup heat since Helene — a sealed gas fireplace or insert keeps a room warm through a power outage, no electricity required for the burner.

Gas logs are the simplest way to get a fire going in an existing fireplace — strike a match or hit a switch and you've got flame, no wood, no ash, no waiting. Steady Flame Fireplaces installs vented and ventless (vent-free) gas log sets in masonry and factory-built fireplaces across Western North Carolina, connected to natural gas or propane and installed by a licensed gas contractor. Gas logs are a favorite upgrade for homeowners who want the look and warmth of a fire in a fireplace they already have, without the work of burning wood.

The first decision is vented versus ventless, and it genuinely matters. Vented gas logs burn with a tall, realistic yellow flame and operate with the chimney damper open, venting combustion byproducts up the flue just like a wood fire — they're all about ambiance and a beautiful fire, with most of the heat going up the chimney. Ventless (vent-free) logs burn cleaner and hotter with the damper closed, putting nearly all their heat into the room, which makes them efficient supplemental heaters — but they add moisture to the air, have Btu limits by room size, and aren't permitted in every application or bedroom. We'll walk you through the trade-offs and code so you choose the right set for your fireplace and how you'll use it.

Done Right, Connected Safely

Getting gas logs right is about more than dropping a log set in the firebox. We confirm your fuel and set the burner for natural gas or propane, position the logs to the manufacturer's pattern so the flame looks natural and burns clean without sooting, verify damper operation and clearances, and connect and pressure-test the gas supply. If your fireplace doesn't have a gas line yet, we can run one — that's licensed work we're built for. We finish with a full burn test and a walkthrough of the controls, whether that's a match-lit valve, a remote, or a wall switch. Every install is done to code and backed by our workmanship guarantee.

Heating Challenges in Old Fort

Old Fort's older in-town homes commonly have masonry fireplaces ready for a wood or propane insert, while cabins up Curtis Creek and Mill Creek rely on propane stoves as steady heat. Newer builds serving the recreation economy suit clean-face propane units. With flooding fresh in mind, we place and size hearths to serve as trustworthy off-grid heat.

Seasonal Tip for Old Fort Homeowners

Cold mountain air spills down the grade into Old Fort on winter mornings, so keep seasoned wood dry and covered and have your propane fireplace and venting inspected before the first freeze.