Why choose Steady Flame Fireplaces in Biltmore Forest?

Steady Flame has served Biltmore Forest and Buncombe County since 2005. We're 10 minutes south from our Asheville headquarters, so we reach Vanderbilt Road, Stuyvesant Crescent, Hilltop Road, Eastwood Road, and surrounding areas fast. Unlike a showroom or a mason, we're a licensed gas-piping contractor, meaning we deliver the whole hearth job — unit, venting, and fuel line — permitted and inspected through Buncombe County. Free estimates, financing, and honest advice on natural gas vs. wood vs. electric.

Is Biltmore Forest on natural gas or propane?

Much of Biltmore Forest sits on a natural-gas main, which is the easiest and lowest-cost fuel for a gas fireplace, insert, or log set — no tank to own or lease, and no propane regulator to maintain. We'll confirm gas availability at your exact address before quoting, and if your street isn't served yet, we'll design around a propane tank instead. Either way, only a licensed gas-piping contractor like Steady Flame can legally run the line, and we permit every job through Buncombe County.

What areas in Biltmore Forest does Steady Flame serve?

We install and service fireplaces, stoves, inserts, and gas lines throughout Biltmore Forest and Buncombe County, including Vanderbilt Road, Stuyvesant Crescent, Hilltop Road, Eastwood Road, Cedar Hill Road, Forest Road. Our Asheville headquarters is 10 minutes south from Biltmore Forest, giving us fast scheduling for installs, repairs, and permitted gas-line work. Since Helene, more Biltmore Forest homeowners treat a fireplace as heat that works when the power doesn't.

Buncombe County · 10 minutes south

Two-Sided Gas Fireplace Installation in Biltmore Forest, NC

A see-through gas fireplace open on two faces, warming and dividing two rooms at once — expertly framed, vented, and gas-piped. Proudly serving Biltmore Forest & Buncombe County.

Free Quote (828) 545-0525

NFI-certified20+ years24/7 service

(828) 545-0525

Professional Two-Sided Gas Fireplace Installation in Biltmore Forest, NC

When you need two-sided gas fireplace installation in Biltmore Forest, NC, Steady Flame Fireplaces is just 10 minutes south from our Asheville headquarters — meaning fast scheduling and reliable, code-compliant work. Steady Flame Fireplaces has been the licensed hearth team that Biltmore Forest area homeowners trust since 2005.

Biltmore Forest is one of Western North Carolina's most exclusive residential enclaves, a canopy of estate homes and winding tree-lined roads laid out beside the Vanderbilt property just south of downtown Asheville. The stately Tudor, Georgian, and shingle-style residences here were built around fireplaces as centerpieces, and homeowners expect their hearths to be as refined as the rest of the house. Because natural gas service runs throughout the town, we can install clean-face direct-vent gas fireplaces and convert tired wood-burners to precise, thermostat-controlled flame without touching the architecture. After Hurricane Helene knocked out power across Buncombe County, even affluent households learned that a properly vented gas hearth is real backup heat, not just ambiance.

Biltmore Forest sits on a natural-gas main, so most gas fireplaces, inserts, and log sets here tie straight into utility gas — no tank to fill and no propane regulator to set. Running the gas line is the part a fireplace showroom or a mason legally can't touch in North Carolina — it takes a licensed gas-piping contractor. Steady Flame holds that license, so we deliver the whole job in Biltmore Forest: unit, venting, and the fuel line, all under one roof. Buncombe County homeowners have leaned on gas hearths as reliable backup heat since Helene — a sealed gas fireplace or insert keeps a room warm through a power outage, no electricity required for the burner.

A two-sided gas fireplace — often called see-through — opens on two faces at once, so a single fire warms and animates two spaces. Homeowners use them as living-dining dividers, between a bedroom and en-suite, or spanning an interior wall and a covered porch to bridge indoor and outdoor living. Because both faces are glass, the flame becomes a shared centerpiece rather than a feature stuck to one wall.

What's Involved

See-through units are the most framing-sensitive fireplaces we install: the cabinet must sit dead-level and plumb so both glass fronts seal, and finishes on each side have to respect noncombustible clearances. Steady Flame plans the rough-in with your builder, then handles the licensed gas work — sizing the line, setting the regulator, and pressure-testing before ignition. Most two-sided models are sealed direct-vent and can't side-vent, so we route the flue up through the roof, a detail we confirm early. We pull permits and balance the flame on both faces before finishing.

Heating Challenges in Biltmore Forest

The housing stock is dominated by large early-20th-century estates with original masonry fireplaces and grand mantels, many with flues that no longer meet code. The right work here is usually a high-output gas insert or direct-vent conversion that preserves the historic firebox surround while adding efficiency and remote control. Newer custom builds on the town's edges call for clean-face linear gas units set flush into stone or plaster.

Seasonal Tip for Biltmore Forest Homeowners

At 2,100 feet the dense tree cover keeps Biltmore Forest cool and damp into late spring, so have your gas fireplace's glass and burner cleaned in early fall before the first inversion mornings settle over the estate lots.