In Fletcher, residential sizing follows the 20-BTU-per-square-foot rule — a 400-square-foot room near 8,000 BTU — bumped up a little for our climate. The wrinkle here is the commercial side: the I-26 and airport corridor's offices, lobbies, and larger spaces have much bigger volumes and their own code considerations, so those get sized very differently.
Two Fletchers, two sizing approaches
Fletcher is part 1990s-era subdivision and part booming I-26 commercial corridor, and the sizing math isn't the same for each. In the subdivisions, builder-grade fireplaces were often installed decorative and undersized; replacing one, we size a direct-vent gas unit to the room's real footage and ceiling so it finally heats. Around the airport, commercial lobbies and offices carry far more volume than any home room, and a linear or great-room-anchor unit sized for that space is a different order of output.
Fletcher sits solidly on the natural-gas mains, which simplifies fuel for both.
Commercial volume, and why headroom matters
A tall commercial space heats nothing like a den — high ceilings and big glass swallow output, so the plain formula badly undershoots. There we size to the cubic volume and the use, and we handle the permit and inspection for the gas work either way, with Henderson County. Demand for gas fireplaces and outdoor features here actually runs ahead of the surrounding residential communities.
Whether it's a subdivision living room or an office lobby, we measure the space, weigh the ceilings and glass, and match the appliance. We're 20 minutes south — call (828) 545-0525.
Fireplace help in Fletcher
We install and service fireplaces throughout Fletcher and the rest of Henderson County — just 20 minutes south from our Asheville-area showroom.