Steady Flame Fireplaces
US flagUkraine flagRussia flagMoldova flagGlobe
Many Backgrounds. One Standard.
Arden, North Carolina

What size propane tank do I need to run a gas fireplace or log set at home?

Arden's neighborhoods — Royal Pines, Skyland — mostly sit on the natural-gas main, so a propane tank usually isn't part of the picture. The bigger opportunity here is the 1980s-90s open masonry fireplaces that leak heat; a sealed gas insert fixes that. Where an address is on propane, one fireplace fits a 120- or 250-gallon tank.

Tired open fireboxes are the real story here

The 1980s-to-'90s homes across Royal Pines, Skyland, and Glenn Bridge often have open masonry fireplaces that pull warm air up the flue — they lose heat rather than make it. A sealed gas insert turns one into an actual heater, and since most of Arden is on the natural-gas main, that insert typically ties to the meter with no tank at all.

On the occasional propane address, a single sealed insert is a light load handled by a 120-gallon (about 420-lb) or buried 250-gallon tank.

When propane feeds more than the fireplace

If a propane home also runs a range, water heater, or whole-house heat, the combined demand on a cold night is what sets the tank — usually 500 gallons so the fireplace doesn't starve when everything fires together.

The tank is your propane supplier's to size, own, and fill; we run and permit everything downstream, with Buncombe County, and pressure-test the line.

Biltmore Park and a fifteen-minute drive

Arden's Biltmore Park retail and office spaces lean on the same gas main, and commercial fireplaces there follow the same rule — on the main, no tank; on propane, size to the full load.

We're 15 minutes south of Emma Rd. Call (828) 545-0525 for a free assessment.

Fireplace help in Arden

We install and service fireplaces throughout Arden and the rest of Buncombe County — just 15 minutes south from our Asheville-area showroom.

Text UsCall NowFree Quote