Steady Flame Fireplaces
US flagUkraine flagRussia flagMoldova flagGlobe
Many Backgrounds. One Standard.
Flat Rock, North Carolina

Can a gas fireplace be converted between natural gas and propane?

Yes. Flat Rock's housing is unusually old — homes dating to the 1800s with oversized open masonry fireplaces and aging clay flue liners — and while the village sits on natural gas, plenty of the units that go into these homes arrive configured for propane and have to be switched. It's licensed work with a model-specific kit, pressure-tested, not a DIY orifice change.

Fitting modern gas into historic homes

In Historic Flat Rock, the character is the point, so owners usually keep the original masonry look and drop a sealed gas insert into that oversized firebox rather than tearing it out. When that insert comes from a dealer or a prior home set for propane, its orifices and regulator setting won't match Flat Rock's natural-gas service — and a propane-configured unit run on natural gas starves for fuel, burning lazy and yellow. The conversion kit resets it to burn the local fuel at full output.

Old flues, new fuel, one licensed job

A conversion in one of these 1800s houses often coincides with lining or sealing an aging clay flue, but on a direct-vent insert the old chimney becomes a chase, not a working flue. A sealed insert also fixes the cold-air draft these open hearths pull into the room while preserving the home's look.

Henderson County permit

Either way, the fuel side is licensed: we confirm your model converts, swap the orifices, reset the pressure, pull the Henderson County permit, and pressure-test before verifying the flame. A mason can rebuild the hearth but legally can't connect the gas — that's our lane. We're 30 minutes north; call (828) 545-0525.

Fireplace help in Flat Rock

We install and service fireplaces throughout Flat Rock and the rest of Henderson County — just 30 minutes south from our Asheville-area showroom.

Text UsCall NowFree Quote