What measurements does a fireplace dealer need before quoting an insert or log set?
In Arden, a lot of 1980s-90s homes in Royal Pines and Skyland have tired open masonry fireplaces that pull heat out of the room — so most quotes are for a sealed insert. We need front and rear width, height to opening and damper, depth low and high, the hearth extension, and the flue sized for a liner.
Turning a heat-loser into a heater
An open masonry fireplace can actually run a net heat loss, while a sealed insert commonly runs 70 percent efficient or better — so the Arden upgrade is usually about making a drafty box into a real heater. That means measuring the opening to its tightest pinch, so a rigid insert seats, and sizing the existing flue for a stainless liner, which every insert needs to vent properly.
Numbers, then fuel
With the firebox measured, we confirm you're on the natural-gas main — Arden sits on it — and where a line would run to the hearth. An insert needs both a liner and a gas line, and running that line is licensed work we permit with Buncombe County. We also ask whether you want steady heat or mostly ambiance, since that steers the appliance and the Btu target.
Commercial spaces too
Biltmore Park's retail and office spaces bring their own gas-fireplace and outdoor-feature quotes, handled the same careful way. We permit with Buncombe County and pressure-test every line. Arden is about fifteen minutes south of our Asheville showroom, so a free in-home assessment is a quick trip. Call (828) 545-0525.
Fireplace help in Arden
We install and service fireplaces throughout Arden and the rest of Buncombe County — just 15 minutes south from our Asheville-area showroom.